How to change your iPhone battery settings in a few simple steps

A new feature that Apple introduced in iOS 11 is battery settings, which allow users to configure their battery settings to improve their iPhone’s performance, efficiency, and longevity.

Battery settings allow users of any iPhone to set various parameters such as how much battery life the device has left on its battery, the amount of time it can use for a call, and how much power it needs to run apps.

These settings can be changed with a tap on the Settings menu, or through an app that can also be used to set the iPhone’s battery settings.

Apple also released a new app called Battery Settings Manager, which can also control your iPhone’s batteries.

Here’s how to change the battery settings on your iPhone to maximize its performance, performance, and battery life.


Open Battery Settings.

To change the iPhone battery, press and hold down the power button, until the screen turns on.

If you’re on an older iPhone, the screen will turn off after you press the power switch.

The Settings menu will open up.

If the battery doesn’t appear, it means that you haven’t configured it correctly.

You can go to Settings and configure battery settings using the Settings app, or you can navigate to the Settings icon and tap on Battery Settings icon to configure the settings.

In the battery section, tap on Change Settings.

From the list of options, select the Battery option, and then tap on Add Battery.

The battery settings menu will appear.

Under the Battery settings, select Settings > Battery.

In Settings > Performance, select Battery performance, then tap the check mark to add a new setting.

The settings screen will display.

If battery performance is not set, the Settings screen will list battery performance options.

If it is set, tap OK.

If Battery performance is set to Low, tap the OK button to remove the setting.

If Performance is set and Performance is off, tap Yes to remove it.

Under Battery settings under Battery, select Power Off.

This will turn the iPhone off.

Under Power, tap Power off.

This should turn off the iPhone.


Change the battery’s settings.

If your iPhone is charging, you can choose to set a percentage for the battery.

If this percentage is low, it will save more power to conserve the battery, but it will drain more energy.

To set a high percentage, you must tap the battery icon in the upper-right corner of the battery screen.

When you choose a percentage, the icon turns yellow and says “Save energy for your battery.”

If you don’t choose the percentage, it turns red and says, “Use less energy.”

Tap the battery to change a percentage and then the battery will turn yellow.

If Power Off is set for the iPhone, it is turned off.

The icons will turn blue.


Change your battery’s temperature.

To control the temperature of your iPhone, tap and hold the power-button until the battery temperature is green.

If there is an amber light around the power buttons, the battery is in low-power mode.

If a green light is present, the iPhone is in standby mode.

You should not turn on the iPhone during standby mode unless you want it to use less power.

In order to turn on and off the battery in standby, you need to press and release the power power button for 10 seconds.

If all the settings are turned on, the Apple Watch will vibrate when the iPhone reaches a certain temperature.


Turn off your battery.

You will be presented with a message that says, “[Battery status] [Charging] [Battery status].

You have turned off the [Battery] for the [Device name] battery.”

This means that the battery has been disconnected and the device is now in standby.

Tap the Power button to turn the device off.

If no message is displayed, then the phone has not connected to its battery.

This message will remain on the screen until you tap the Power Button again to turn it back on. 5.

Check battery voltage.

If everything is turned on and your battery is charging normally, the device will be in standby and will stay at the low-voltage setting.

When the device goes into low-mode mode, the display will show that it is charging.

If at any time you feel that the device needs to be in low power mode, hold the Power (Power off) button until the device turns off completely.


Recharge your battery and turn on your charger.

You need to charge your iPhone while it is in Low-Power mode.

To recharge the battery while it’s in Low Mode, tap Battery, then Charge.

Once the device charges, the Power/Charging button will turn red and say, “Charging.

You have completed charge for the Battery.”

If the phone is in Normal Mode, it’s battery is fully charged and the display says “Charged.”

The device will continue to be charged for a few minutes.


Turn on your battery to charge it again